Resins in powder coatings industry
EPOXY RESINS FOR POWDER COATINGS
Item |
EEW |
Softening Point C |
Viscosity |
Color ( |
Applications |
SE1002 |
600-700 |
81-91 |
1700~2600 |
1 |
Powder coatings |
SE1003 |
700-900 |
90-96 |
2300~3700 |
1 |
Powder coatings |
SE1003UE |
740-800 |
85-95 |
3100~5200 |
1 |
Powder coatings |
SE1004 |
900-1000 |
96-107 |
2700~5400 |
1 |
Powder coatings |
SE1007 |
1300-1700 |
117-127 |
Y-Z1 |
1 |
Can Coatings |
SE1009 |
1800-2500 |
130-145 |
Z2-Z6 |
1 |
Can Coatings |
Gardner-Hold method (40% N.V. Butyl Carbitol Solution)
POLYESTER RESINS FOR HYBRID POWDER COATINGS
Item |
Viscosity |
Acid Value mgKOH/g |
Softening point,℃ |
Tg ℃ |
Applications |
Hybrid type 50:50 |
|||||
PER |
500-2000 |
70-82 |
95-115 |
52 |
Standard type 50:50 type |
PER5050B1 |
7000-11000( |
72-78 |
95-115 |
52 |
Good flow |
Hybrid type 60:40 |
|||||
PER |
800-2500 |
48-55 |
95-115 |
56 |
Standard type60:40, Good decoration |
PER |
800-2500 |
52-58 |
95-115 |
52 |
Better flow |
PER |
800-2500 |
52-58 |
95-115 |
56 |
Less yellowing |
PER6040B1 |
5000-8000( |
50-56 |
90-110 |
53 |
Very High gloss |
Hybrid type 70:30 |
|||||
PER |
2000-4500 |
32-40 |
95-115 |
55 |
Standard type 70:30 |
PER7030B1 |
1000-14000 ( |
28-34 |
95-115 |
52 |
Excellent flow |
POLYESTER RESINS FOR PURE POLYESTER POWDER COATING
TGIC type |
|||||
Item |
Viscosity, mPa.s( |
Acid Vale mgKOH/g |
Softening point |
Tg |
Applications |
PETG-1000B1 |
9000-12000( |
32-38 |
100-120 |
64 |
93/7, Standard type |
PETG-1000B2 |
11000-15000( |
32-38 |
100-120 |
66 |
93/7, for tribo-gun. |
Primid cure type |
|||||
PEPM |
1000~2000 |
28-34 |
105-123 |
58 |
Primid, good flow type |
PEPM |
1000~2000 |
28-34 |
105-123 |
58 |
Primid, good film property |
PEPM-2000B1 |
12000-16000 ( |
28-34 |
100-120 |
66 |
Primid, suitable for tribo-gun. |
PEPM-2000B2 |
12000-16000( |
28-34 |
100-120 |
66 |
Primid for exterior environments |
PEPM-2000B3 |
12000-18000( |
20-25 |
100-120 |
57 |
Primid for exterior environments |