{"id":381,"date":"2025-10-26T10:19:21","date_gmt":"2025-10-26T02:19:21","guid":{"rendered":"https:\/\/triunechem.com\/?page_id=381"},"modified":"2025-10-26T10:22:46","modified_gmt":"2025-10-26T02:22:46","slug":"other-additives-in-powder-coatings-industry","status":"publish","type":"page","link":"https:\/\/triunechem.com\/en\/other-additives-in-powder-coatings-industry","title":{"rendered":"Other additives in powder coatings industry"},"content":{"rendered":"\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Other additives in powder coatings industry\n\n<\/h1>\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t

Outgassing agent: Benzoin\n\n\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t

Molecular Weight<\/p><\/td>

212.25<\/p><\/td><\/tr>

Purity<\/p><\/td>

99.0% min<\/p><\/td><\/tr>

Appearance<\/p><\/td>

Off-white powder<\/p><\/td><\/tr>

Melting point<\/p><\/td>

133-137C<\/p><\/td><\/tr>

Boiling point<\/p><\/td>

344C<\/p><\/td><\/tr>

Specific Gravity<\/p><\/td>

1.31 g\/ml<\/p><\/td><\/tr>

Solubility in Water<\/p><\/td>

0.03g\/100ml<\/p><\/td><\/tr>

Vapor Pressure<\/p><\/td>

1.1<\/p><\/td><\/tr>

Loss on drying<\/p><\/td>

0.5% max.<\/p><\/td><\/tr>

Residue on ignition<\/p><\/td>

0.1% max<\/p><\/td><\/tr>

Application<\/p><\/td>

As a Degas agent for powder coating,\u00a0 also can be Ultraviolet curing agent<\/p><\/td><\/tr><\/tbody><\/table>\n\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t

Outgassing agent: Polyethylene Wax\n\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t

\u00a0<\/p><\/td>

DA961<\/p><\/td>

DA962<\/p><\/td><\/tr>

Chemical Name:<\/p><\/td>

Polyethylene Wax<\/p><\/td>

Polyethylene Wax<\/p><\/td><\/tr>

Appearance<\/p><\/td>

White micronized powder<\/p><\/td><\/tr>

Melting point<\/p><\/td>

138C<\/p><\/td>

135C<\/p><\/td><\/tr>

Specific Gravity<\/p><\/td>

0.99 g\/ml<\/p><\/td>

0.97<\/p><\/td><\/tr>

Particle size,\u00a0\u03bcm<\/p><\/td>

\u00a0<\/p><\/td><\/tr>

D50<\/p><\/td>

<6<\/p><\/td>

<6<\/p><\/td><\/tr>

D90<\/p><\/td>

10<\/p><\/td>

12<\/p><\/td><\/tr>

Application<\/p><\/td>

  1. a.Polyester\/TGIC\/primid\/powder link<\/li>
  2. b.Ppolyester\/epoxy<\/li>
  3. c.Polyurethane, acrylate and epoxy coatings<\/li>
  4. d.Dosage: 0.5 to 4% wt.<\/li><\/ol><\/td><\/tr><\/tbody><\/table>\n\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t\t

    Leveling additive PV-I\n\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t
    \n\t\t\t\n\t\t\t

    Description<\/strong><\/p><\/td><\/tr>

    It is a kind of composition of copolymer of methyl acrylate and butyl acrylate. It is major effect is to smooth the problem craters, pinhole, fisheye effect for the coating surface.<\/p><\/td><\/tr>

    Technical data<\/strong><\/p><\/td><\/tr>

    Appearance<\/p><\/td>

    White granules<\/p><\/td><\/tr>

    Softening points<\/p><\/td>

    95-125 C<\/p><\/td><\/tr>

    Volatile<\/p><\/td>

    1 % max.<\/p><\/td><\/tr>

    Application and dosage<\/strong><\/p><\/td><\/tr>

    Used as the leveling additive used in epoxy, polyester, hybrid powder coating systems. The dosage of Leveling additive is between 0.5~1.5% based on the total powder.<\/p><\/td><\/tr><\/tbody><\/table>\n\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

    \n\t\t\t\t\t

    Leveling agent PV88\n\n\n\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t
    \n\t\t\t\n\t\t\t

    Description:<\/strong><\/p><\/td><\/tr>

    It is a polyacrylate with silica carriers. And used to be prevent the problem of craters, pinhole and fisheye problem. It can be used in all powder coating systems too.<\/p><\/td><\/tr>

    Technical data<\/strong><\/p><\/td><\/tr>

    Item<\/p><\/td>

    PV88<\/p><\/td><\/tr>

    Appearance<\/p><\/td>

    Free flow powder<\/p><\/td><\/tr>

    Active content<\/p><\/td>

    65 % min<\/p><\/td><\/tr>

    Volatile content<\/p><\/td>

    1.5% max<\/p><\/td><\/tr>

    Application and\u00a0<\/strong>Technical dat<\/strong>a<\/strong><\/p><\/td><\/tr>

    1. Can be used in all thermo set powder coating systems.<\/p>

    2. Can eliminate the orange peel and craters of film effect.<\/p>

    3. Good compatibility with all base resin. Easy for dry blend.<\/p>

    4. Dosage is around 0.5-1.2% based on the total blend<\/p><\/td><\/tr><\/tbody><\/table>\n\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

    \n\t\t\t\t\t

    Leveling additives: PV7010\n\n\n\n\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t
    \n\t\t\t\n\t\t\t

    Description<\/b><\/p><\/td><\/tr>

    Leveling additives PV7010 is a copolymer of methyacrylate and Butylacrylate. Which is used as the additives for improve the coating surface from the problem like craters, pinhole and fish eyes etc. Even if the dosage is small, it will improve the property dramatically.<\/p><\/td><\/tr>

    Technical data<\/b><\/p><\/td><\/tr>

    Appearance<\/p><\/td>

    White granules<\/p><\/td><\/tr>

    Softening points<\/p><\/td>

    95~110C<\/p><\/td><\/tr>

    Non Volatile<\/p><\/td>

    99% min<\/p><\/td><\/tr>

    Applications<\/b><\/p><\/td><\/tr>

    1.Blend with the resin before extruder.<\/p>

    2. Dosage is around 0.5~2%<\/p>

    3. Use alone without other leveling agent will not create leveling effect.<\/p>

    4.Can improve the performance of leveling agent like PV88.<\/p><\/td><\/tr><\/tbody><\/table>\n\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

    \n\t\t\t\t\t

    Anti-Caking agent: Micro powder silica\n\n\n\n\n\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t
    \n\t\t\t\n\t\t\t

    Description<\/b>s<\/b>:<\/b><\/p><\/td><\/tr>

    High purity silicon oxide perform as good anti-caking agent for powder coating application, due to it\u2019s special properties, even with 40% water absorption by weight they still keep in powder form, so per from as the anti-caking agent for powder.<\/p><\/td><\/tr>

    Specification:<\/b><\/p><\/td><\/tr>

    Item<\/p><\/td>

    MS40<\/p><\/td><\/tr>

    Appearance<\/p><\/td>

    White powder<\/p><\/td><\/tr>

    Average particle size(um)<\/p><\/td>

    4 max<\/p><\/td><\/tr>

    Surface moisture %<\/p><\/td>

    3.5 max<\/p><\/td><\/tr>

    Surface Hydroxyl %<\/p><\/td>

    8 max<\/p><\/td><\/tr>

    PH value(5% solution)<\/p><\/td>

    6-8<\/p><\/td><\/tr>

    Refractive rate<\/p><\/td>

    1.45-1.46<\/p><\/td><\/tr>

    Bulk Density<\/p><\/td>

    0.075-0.015<\/p><\/td><\/tr>

    Specific surface area M2\/g<\/p><\/td>

    180-220<\/p><\/td><\/tr>

    Major applications and storage:<\/b><\/p><\/td><\/tr>

    1. a.Anti-caking agent for powder coating.<\/li>
    2. b.Matting agent for liquid coating and leather coating<\/li><\/ol>

      c.\u00a0 Packing:\u00a05kg\/woven bag with two later of PE liner.<\/p>

      d.\u00a0 Storage: Keep in indoor and dry space with low moisture content.<\/p><\/td><\/tr><\/tbody><\/table>\n\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

      \n\t\t\t\t\t

      Wrinkle texture effects: TE6051\n\n\n\n\n\n\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t
      \n\t\t\t\n\t\t\t

      Description<\/b><\/p><\/td><\/tr>

      TE6051 is an organic metallic complex, designed for producing wrinkle or texture effect on powder coating film. It performs excellent effect on Epoxy or hybrid system and also can be useful in pure polyester system.<\/p><\/td><\/tr>

      Appearance<\/p><\/td>

      Yellowish powder<\/p><\/td><\/tr>

      Melting range<\/p><\/td>

      192-197C<\/p><\/td><\/tr>

      Non Volatile<\/p><\/td>

      95.5% min<\/p><\/td><\/tr>

      Curing condition<\/p><\/td>

      180C\/ 20~25 min<\/p>

      190C\/15 min<\/p>

      200C\/10-12 min<\/p><\/td><\/tr>

      Applications<\/b><\/p><\/td><\/tr>

      1. a.Can used to produce fine texture effect on coating surface.<\/li>
      2. b.Dosage is around 5-10%, depend on the required effect.<\/li>
      3. c.More filler on the formulation will cause smaller texture effect.<\/li>
      4. d.When adding cameo agent, please pre-mix (dry blend)the cameo agent with the resin first before the extrusion.<\/li><\/ol><\/td><\/tr><\/tbody><\/table>\n\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
        \n\t\t\t\t\t

        Cameo agent 508-I and 508\n\n\n\n\n\n\n\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t\t\t
        \n\t\t\t\n\t\t\t

        Description<\/strong><\/p><\/td><\/tr>

        1. a.508-I andare\u00a0polyacrylate which can be used to produce hammer tone effect powder coatings.<\/li><\/ol>

          b.\u00a0 The differences between 508-I and 508 are that the surface made from 508 is uneven compared with the one from 508-I.<\/p><\/td><\/tr>

        Technical data:<\/strong><\/p><\/td><\/tr>

        Appearance<\/strong><\/p><\/td>

        508-I Fine grains<\/strong><\/p><\/td>

        508 Fine grains<\/strong><\/p><\/td><\/tr>

        Softening point (ball ring)<\/strong><\/p><\/td>

        114-122<\/strong><\/p><\/td>

        90-115<\/strong><\/p><\/td><\/tr>

        Non Volatile content<\/strong><\/p><\/td>

        98.5% min.<\/strong><\/p><\/td>

        99% min.<\/strong><\/p><\/td><\/tr>

        Applications:<\/strong><\/p><\/td><\/tr>

        a. 508-I and 508 may be applied in epoxy, hybrid and polyester systems<\/strong><\/p>

        b. Dry blend with coating resin is a must.<\/strong><\/p>

        c. Dosage of agents in the coatings depends on the\u00a0surface of film from 0.1% to 2%wt.<\/strong><\/p><\/td><\/tr><\/tbody><\/table>\n\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"

        Other additives in powder coatings industry Outgassing agent: Benzoin Molecular Weight 212.25 Purity 99.0% min Appearance Off-white powder Melting point<\/p>\n","protected":false},"author":2,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_seopress_robots_primary_cat":"","_seopress_titles_title":"","_seopress_titles_desc":"","_seopress_robots_index":"","footnotes":""},"class_list":["post-381","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/triunechem.com\/en\/wp-json\/wp\/v2\/pages\/381","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/triunechem.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/triunechem.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/triunechem.com\/en\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/triunechem.com\/en\/wp-json\/wp\/v2\/comments?post=381"}],"version-history":[{"count":4,"href":"https:\/\/triunechem.com\/en\/wp-json\/wp\/v2\/pages\/381\/revisions"}],"predecessor-version":[{"id":385,"href":"https:\/\/triunechem.com\/en\/wp-json\/wp\/v2\/pages\/381\/revisions\/385"}],"wp:attachment":[{"href":"https:\/\/triunechem.com\/en\/wp-json\/wp\/v2\/media?parent=381"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}